Monday, July 5, 2010

Devilish wrapping rings turning heavenly beautiful

Two customers came to me. They were friends and had been to Sri Lanka together. There, they had bought a number of beautiful faceted stones and now they wanted them set in each their wrapping ring. One had seven stones and wanted them set in a wrapping ring made of 14 carat gold, the other had five stones and a redundant wedding ring of 14 carat gold that she wanted incorporated, but the rest made of silver.

We had a long chat and made a number of drawings. They wanted wrapping rings, but not identical rings and actually had each their style. The one with the seven stones wanted a curved design, possibly with some balls too, while the one with the five stones wanted a more minimalistic and simple design.

Very well – I started working. It took quite a while to create all those settings – most of them were slightly irregular, and so nothing premade could be used at all. Then I removed the writing from the inside of the wedding ring, cut it open and milled it a bit thinner before closing it to a ring again – now absolutely plain and simple.

Creating a wrapping ring is principally very simple. You take a length of wire (I find 1,3 mm the best gauge), wrap it around a ring mandrel where you know it would fit, and solder it all together. However, it’s of cause not that simple. Thing is, it has to be wrapped in a way, that leaves no crossings of the wire at the sides of the ring, which would be very annoying when worn. And then of cause you need to wrap it in a way that can accommodate all the settings you are planning for. The more stones, the more complicated. Needless to say, that the one with the seven stones presented quite a challenge! 14 carat gold is also not that easy to work with. Yes, pure gold is very soft, but 14 carat gold is half copper/silver and other metals, which makes the alloy a lot harder to work than sterling silver. A lot of swearing words were heard in my studio while manipulating (and annealing) the wire until I was satisfied.

Then I asked my customers in for a fitting. Not only was it important to find out if the ring actually fit. If you create a wide wrapping ring, it very much depends on how the finger is created. Me, I have what appears as moderately slender fingers, but they are rather fleshy at the base. That means that a wide band very quickly feels too small, even though it has the “right” size. My customers however, did not have that issue, and so the rings fit – phew! Then we started playing around with the settings. I had of cause a suggestion, but we ended moving the stones around quite a lot before we were all satisfied. I took pictures to remember for my further work:

Actually, I ended up changing the settings of the golden ring once again, but that is how it is – when you work with it, you often find out that another solution is the better one. Luckily my customer and I agreed on a new version.

Assembling the silver/gold ring version was fairly easy. With “only” five settings we were on friendly terms.



The big golden ring with the seven settings however, was a stubborn lady and I soldered, re-soldered and then again eight times before I was satisfied, all the settings and all the balls were in place. Setting the stones of cause also was a challenge, due to the hard-alloy-issue, but I propped the ring on my mandrel, fixated it in the vice and used a punch and hammer to tap the settings over the stones.


Once I was done renovating and polishing I leaned back and looked at them. I might have been very annoyed at a point or two in that process, but I must say… the result was absolutely stunning! The silver/gold version was elegant, colorful and absolutely perfect for my customer. The golden was sumptuous like an Indian Bollywood movie, very feminine and alive with all the balls carefully placed to balance the stones in order to create a overall harmonic design. “Wow” I though “just… wow!” -and ended the day being rather proud of my work.

9 comments:

  1. These are totally gorgeous and I love your stories. I feel like I'm there looking over your shoulder.

    ReplyDelete
  2. Oh, that is great! Exactly how I wanted my readers to feel :-) Thank you!

    ReplyDelete
  3. Wow, these are beautiful! I've actually never seen a wrap ring before, and now I'm itching to try one myself.

    ReplyDelete
  4. Gorgeous :) Alike, and yet each on so unique- each in its own way.

    ReplyDelete
  5. @Jeanie: Laughing here - what a wonderfull play of words :-)
    @Nickie: Do try it! It is, as I said, principally rather easy. Takes at times a lot of solder though to make it solid enough. Remember to anneal while you work with the wire - I tend to forget that and start swearing *grin*

    ReplyDelete
  6. Ohhh these are beautiful!!! Thanks for showing the technique ♥

    ReplyDelete
  7. Uhhh huhuuuu... nammenam... Må eje... Kommer snart og besøger dig i dit vidunderlige værksted :) Og måske man kunne overtale dig til at gentage disse vidundere?

    ReplyDelete
  8. Kom glad Nanna - glæder mig til at se dig i dag :-)

    ReplyDelete